CH2O

Synonyms
HCHO
H2CO
Formaldehyde
Methanal
NDACC MLO FTIR

Solar viewing Fourier Transform Interferometer (FTIR). This is a ground based instrument stationed at the NOAA Mauna Loa Observatory (MLO). It operates daily in an autonomous mode taking middle infrared solar spectra of the terrestrial atmosphere. It began operation in 1995 and has run continuously since. The data are used for long term studies of many trace species in the atmosphere. Its operated as part of the Network for the Detection for Atmospheric Composition Change (NDACC www.ndacc.org). See https://www2.acom.ucar.edu/irwg for information on the network and https://www2.acom.ucar.edu/irwg for info on PI J. Hannigan. Data are publicly available at www.ndacc.org. Data products consist of retrievals from the remote sensing spectra of vertical profiles of CO, CH4, ClONO2, HCOOH, C2H6, HCN, HCl, HF, HNO3, H2O, HDO, OCS, N2O, O3, H2CO. Other species are available.

Instrument Type
Measurements
Point(s) of Contact
COmpact Formaldehyde FluorescencE Experiment

The NASA GSFC COmpact Formaldehyde FluorescencE Experiment (COFFEE) instrument measures formaldehyde (CH2O) using a nonresonant laser induced fluorescence (LIF) technique.  Originally designed to fly in the unpressurized pod of the Alpha Jet, COFFEE is capable of operation on both pressurized and unpressurized (high-altitude) aircraft.  COFFEE possesses the high sensitivity, fast time response, and dynamic range needed to observe CH2O throughout the troposphere and lower stratosphere.

Formaldehyde is produced via the oxidation of hydrocarbons, notably methane (a ubiquitous greenhouse gas) and isoprene (the primary hydrocarbon emitted by vegetation). Observations of CH2O can thus provide information on many atmospheric processes, including:
- Convective transport of air from the surface to the upper troposphere
- Emissions of reactive hydrocarbons from cities, forests, and fires
- Atmospheric oxidizing capacity, which relates to formation of ozone and destruction of methane
In situ observations of CH2O are also crucial for validating retrievals from satellite instruments, such as OMI, TROPOMI, and TEMPO.

Instrument Type
Measurements
Point(s) of Contact
Compact Airborne Formaldehyde Experiment

The NASA GSFC Compact Airborne Formaldehyde Experiment (CAFE) instrument measures formaldehyde (CH2O) on both pressurized and unpressurized (high-altitude) aircraft. Using non-resonant laser induced fluorescence (LIF), CAFE possesses the high sensitivity, fast time response, and dynamic range needed to observe CH2O throughout the troposphere and lower stratosphere.

Formaldehyde is produced via the oxidation of hydrocarbons, notably methane (a ubiquitous greenhouse gas) and isoprene (the primary hydrocarbon emitted by vegetation). Observations of CH2O can thus provide information on many atmospheric processes, including:
- Convective transport of air from the surface to the upper troposphere
- Emissions of reactive hydrocarbons from cities, forests, and fires
- Atmospheric oxidizing capacity, which relates to formation of ozone and destruction of methane
In situ observations of CH2O are also crucial for validating retrievals from satellite instruments, such as OMI, TROPOMI, and TEMPO.

Instrument Type
Measurements
Point(s) of Contact
In Situ Airborne Formaldehyde

The NASA GSFC In Situ Airborne Formaldehyde (ISAF) instrument measures formaldehyde (CH2O) on both pressurized and unpressurized (high-altitude) aircraft. Using laser induced fluorescence (LIF), ISAF possesses the high sensitivity, fast time response, and dynamic range needed to observe CH2O throughout the troposphere and lower stratosphere, where concentrations can range from 10 pptv to hundreds of ppbv.

Formaldehyde is produced via the oxidation of hydrocarbons, notably methane (a ubiquitous greenhouse gas) and isoprene (the primary hydrocarbon emitted by vegetation). Observations of CH2O can thus provide information on many atmospheric processes, including:
- Convective transport of air from the surface to the upper troposphere
- Emissions of reactive hydrocarbons from cities, forests, and fires
- Atmospheric oxidizing capacity, which relates to formation of ozone and destruction of methane
In situ observations of CH2O are also crucial for validating retrievals from satellite instruments, such as OMI, TROPOMI, and TEMPO.

Instrument Type
Measurements
Point(s) of Contact
Compact Atmospheric Multispecies Spectrometer

The CAMS instrument’s core design and operation is similar to the DFGAS (Difference Frequency Generation Absorption Spectrometer) instrument, which has been successfully deployed for fast, accurate, and sensitive airborne measurements of the important trace gas formaldehyde (CH2O). CAMS like DFGAS is based on tunable mid-IR (3.53-μm) absorption spectroscopy utilizing advanced fiber optically pumped difference-frequency generation (DFG) laser sources. Mid-Infrared light at 2831.6-cm-1 (3.53 μm) is generated by mixing two near-IR room temperature lasers (one at 1562 nm and the other at 1083 nm) in a non-linear crystal (periodically poled lithium niobate). The DFG laser output is directed through a multipass Herriott absorption cell (90-m pathlength in ~ 1.7 liter volume) where the laser light is selectively absorbed by a moderately strong and isolated vibrational-rotational absorption feature of CH2O. The transmitted light from the cell is directed onto an IR detector employing a number of optical elements. A portion of the IR beam is split off by a special beam splitter (BS) before the multipass cell and focused onto an Amplitude Modulation Detector (AMD) to capture and remove optical noise from various components in the difference frequency generation process. A third detection channel from light emanating out the back of the beam splitter is directed through a low pressure CH2O reference cell and onto a reference detector (RD) for locking the center of the wavelength scan to the absorption line center. The mid-IR DFG output is simultaneously scanned and modulated over the CH2O absorption feature, and the second harmonic signals at twice the modulation frequency from the 3 detectors are processed using a computer lock-in amplifier [Weibring et al., 2006].

Instrument Type
Measurements
Point(s) of Contact
(Co-I)
Difference Frequency Generation Absorption Spectrometer

The DFGAS instrument utilizes a room temperature infrared (IR) laser source based upon non-linear difference frequency generation (DFG) in the measurement of CH2O.

Mid-IR laser light is generated in the DFG system by mixing the output of two near-IR room temperature laser sources (one at 1562-nm and the other at 1083-nm) in a periodically poled lithium niobate (PPLN) non-linear wavelength conversion crystal. The mid-IR difference frequency at 2831.6 cm-1 (3.53-μm) is generated at the PPLN output and directed through a multipass astigmatic Herriott cell (100-m pathlength using ~ 4-liter sampling volume) and ultimately onto IR detectors employing a number of optical elements. A portion of the IR beam is split off by a special beam splitter (BS) before the multipass cell and focused onto an Amplitude Modulation Detector (AMD) to capture and remove optical noise from various components in the difference frequency generation process. A third detection channel from light emanating out the back of the beam splitter is directed through a low pressure CH2O reference cell and onto a reference detector (RD) for locking the center of the wavelength scan to the absorption line center. The mid-IR DFG output is simultaneously scanned and modulated over the CH2O absorption feature, and the second harmonic signals at twice the modulation frequency from the 3 detectors are processed using a computer lock-in amplifier [Weibring et al. [2006].

Ambient air is continuously drawn through a heated rear-facing inlet at flow rates around 9 standard liters per minute (slm), through a pressure controller, and through the multipass Herriott cell maintained at a constant pressure around 50-Torr. Ambient measurements are acquired in 1-second increments for time periods as long as 60 to 120-seconds (to be determined during the campaign), and this will be followed by 15-seconds of background zero air acquisition, using an onboard CH2O scrubbing unit. The zero air is added back to the inlet a few centimeters from the tip at flow rates ~ 2 to 3 slm higher than the cell flow. This frequent zeroing procedure very effectively captures and removes optical noise as well as residual outgassing from inlet line and cell contaminants. Retrieved CH2O mixing ratios are determined for each 1-second ambient spectrum by fitting to a reference spectrum, obtained by introducing high concentration calibration standards (~ 3 to 7-ppbv) from an onboard permeation calibration system into the inlet approximately every hour. The calibration outputs for the two permeation tubes employed are determined before and after the field campaign using multiple means, including direct absorption employing the Beer-Lambert Law relationship. The 1-second ambient CH2O results can be further averaged into longer time intervals for improved precision. However, in all cases the 1-second results are retained. This flexibility allows one to further study pollution plumes with high temporal resolution, and at the same time study more temporally constant background CH2O levels in the upper troposphere using longer integration times.

Instrument Type
Measurements
Point(s) of Contact
(Co-I)
Replaced By
Georgia Tech Laser-Induced Fluorescence

The Georgia Tech Laser-Induced Fluorescence instrument measures nitric oxide (NO), formaldehyde (HCHO), and nitrogen dioxide (NO2). Each species is measured by laser-induced fluorescence at reduced pressure. Ambient air is drawn in through a pinhole orifice into a pair of multipass White cells. The pressure in the White cells is maintained at 5-10 mbar to extend the fluorescence lifetime, and the multiple passes (typically 32-40) effectively extends the probe interaction volume. The ambient air is probed at 90o from the flow and the fluorescence collected at 90o to the flow and probe.

NO is probed at the 226 absorption line and monitored at the 247 nm fluorescence. The laser pulse and scattering will be time-gated out using microchannel plate detectors. The expected 2-sigma limit of detection is 5 pptv/min. Formaldehyde is probed at 353 nm and the fluorescence monitored in a range from 400 to 450 nm. The expected performance is 10 pptv/min. NO2 will be probed near 435 nm and the fluorescence around 780 nm collected. Its expected performance is 15 pptv/min. In each case, the probe wavelength will be alternately switched from the absorption feature to a nearby “off-line” position to determine the background. The actual frequency will be monitored in reference cells. Calbration is done by standard addition to the airflow. The light sources used are custom-built cavities pumped by a diode-pumped Nd:YAG laser operating at ~10 kHz.

Instrument Type
Measurements
NO,
Aircraft
Point(s) of Contact
Dual Channel Airborne tunable diode Laser Spectrometer

The instrument uses two-tone frequency modulation (TTFM) with signal detection at approximately equals 12 MHz. Multiplexing is achieved using a dichroic optical element and a mechanical chopper which blocks each beam alternately. A control program running on a dedicated digital signal processor (DSP) allows the registration of the full absorption line shape each millisecond and simultaneous zero overhead on-line data reduction using a multiple linear regression algorithm. Gas exchange through the compact multireflection cell (2.71 volume, total path 53 m.) takes place in approximately equals 200 ms and thus determines the instrument response time.

Measurements
Aircraft
Point(s) of Contact
(Co-I)